M370430-01 Rev F iii
About This Manual (firmware v2.0 and higher)
The Operating Manual provides installation and operating information
for the XG Family Programmable DC Power Supply.
The Manual provides safety information, features and specifications,
installation procedures, functional test procedures, and operating
procedures for both local (front panel) operation and remote operation.
The Manual also provides information on the GPIB interface option and
LXI compliant Ethernet (ENET) interface for models with the MEB
options.
The Manual is intended for the user who is familiar with electronic
power supplies, Constant Voltage, Constant Current, and/or Constant
Power operating modes, and the control of output power. The user
should be familiar with practicing safe techniques while making
supply or pin connections.
The following conventions are used in this guide.
WARNING
Warnings identify conditions or practices that could result in personal
injury or loss of life.
CAUTION
Cautions identify conditions or practices that could result in damage to the
unit or other equipment.
Important: Important notes provide information that is important for you
to know. They are not as serious as Warnings or Cautions.
To Next Page
Loading...