D
Daniel SawyerAug 3, 2025
What to do if the AMF-BRUNS Lifting Systems ramp does not deploy or stow correctly?
- SsandovalchristopherAug 3, 2025
If the AMF-BRUNS Lifting Systems ramp doesn't deploy or stow correctly, it might be due to foreign objects blocking the latching mechanisms. Inspect and clean these mechanisms. Also, check the spring-loaded latches and replace them if defective. Defective gas-operated struts can also cause this issue, so inspect and replace them if necessary. Finally, the access ramp mechanism might be misaligned, requiring realignment.



