Operation
Page 30 of 60 Easy Ramp and EasyFlex Ramp
5.4 Fitting the Centre Smartfloor Seat
Make certain that the locking levers are in the unlocked
position (see Figure 13, page 28).
Insert the seat into the airline rails.
Make certain that the seat is pushed right back against
the rear stop if it is to be used by a passenger.
Push the seat forwards or backwards until it audibly en-
gages.
If the seat cannot be adjusted, it is already locked.
Push both locking levers forwards to their stops such that
the locking pins engage (see Figure 14).
Check that the seat is clamped in the airline rails at both
sides and does not wobble.
5.5 Loading a Passenger / Wheelchair
Accompany the wheelchair to a position in front of the
deployed ramp.
Swivel the FutureSafe head and back support (optional)
out of the vehicle.
Operate the rocker switch such that the indicator lamp in
the rocker switch lights up (see Figure 6, page 19).
Pull the electrically operated belts out to the wheelchair.
To Next Page
