S-101
e-mail: service@amfreece.cz; parts@amfreece.cz; website: www.amfreece.com
Phones: +420 582 309 146+ (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
Revised 09/2004
1-6
LOWER SYSTEM
Turn L.H. handwheel until
race and loopers are in front.
Thread as shown.
Threading details for
split disc tension
Threading details for
solid roller tension
CORD THREADING DIAGRAM
Throat plate
Race
Crank machine until race faces as
shown.
Note:
Cord may also be led from rear
of machine through guide A, and
up through the race and throat
plate as shown.
Note: Refer to Sheet 23 for threading diagrams on Cord Trim Machines.
THREADING DIAGRAMS
To Next Page
Loading...
