Amiko Multi Tracker 2 - Spectrum Chart; System Settings; Beep Settings; Auto Standby

To Next Page

To Previous Page

User`sManual

15/18

z FREQ:   Thefrequencyofeachchannel

z LEVEL:  Thepowerlevelofthefirstchannel

z DELTA1:  Thedeltaofpowerleveltothefirstchannel

z DELTA2:  Thedeltaofpowerleveltothefirstchannel 

7.3SPECTRUMCHART

Pleaserefer5.3SpectrumChart.

8.SYSTEMSETTING



z Beep:   Thebeepstatusduringpressingkeysorwhenthesignalislocking.

Press[◄/►]toturnonorturnoffbeep.

z AutoStandby: Setthetimeformetertoenterstandbymodeautomatically.Press

[◄/►]toswitchbetweenOff,10min,20min,30minand60min.

z Language:

 ThelanguageofUI.Press[◄/►]toswitchbetweenavailable

languages

z FactoryReset: Press[OK]todisplayaconfirmdialog.ThenselectYEStodoa

factoryresetorselectNOtocancel.

z HardwareVer: Theversionnumberofhardware.

z SoftwareVer:  Theversionnumberofsoftware.

9.ACCESSORIES

Poweradapter,2RFconnector,1CDforusermanual.