23
ADVANCED OPTIONS:
Keyboard Input Mode
TERM CHAR:
ON: Strips any termination character from the bar code that was scanned.
OFF*: Does not strip any termination characters from the bar code.
The optional Termination Character is transmitted at the end of the data.
None - None
Tab - Horizontal Tab
CR - Carriage Return
CRLF - Carriage Return & Line Feed
FE/VT – Field Exit (usually used on AS/400 systems)
Custom – User Defined Termination Character
If the User Defined Termination Character is selected, then use the left 3and 4right
arrow keys to select the custom character.
Allow TC Override
To Next Page
Loading...
