EasyManua.ls Logo

AML M5900 - Page 37

AML M5900
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30
ON Uniform Symbology Specification (3-1-3 mod 10)
OFF* None (no check digit required)
OPCC Check Digit
Specifies if the OPCC check digit type will be used with Interleaved 2 of 5:
ON Optical Product Code Council (2-1-2 mod 10)
OFF* None (no check digit required)
Send Check Digit
ON Transmit the Interleaved 2 of 5 check digit with the bar code data.
OFF* The check digit is not transmitted.
Enable Fixed Length
ON Read only Fixed Length Interleaved 2 of 5 bar code labels that match the
lengths defined in “Set Fixed Length #1 - #3” options below. The check
digit can be on or off.
OFF* Disable Fixed Length mode. Read all Interleaved 2 of 5 labels without
regard to length.
<--> 1
Sets the first valid Fixed Length for Interleaved 2 of 5. Enter a two-digit value to
enter the length. Valid lengths are 02 to 60 characters. By definition, the lengths
of Interleaved 2 of 5 labels are an even number of characters. The default Fixed
Length is 2 characters.
<--> 2
Sets a second valid Fixed Length for Interleaved 2 of 5. Enter a two-digit value to
enter the length. The default length is set to 6 characters.
<--> 3
Sets a third valid Fixed Length for Interleaved 2 of 5. Enter a two-digit value to
enter the length. The default length is set to 6 characters.

Other manuals for AML M5900

Related product manuals