37
Single Type: Enable Data Editing of a single bar code.
<--> Strip Leading (0-9, A-F)
Refers to the number (0-15) of characters to be stripped or removed from the beginning
of the bar code data.
<--> Strip Trailing (0-9, A-F)
Refers to the number (0-15) of characters to be stripped or removed from the end of the
bar code data.
NOTE: If the total number of strip characters (both Leading and Trailing) is greater than
the number of characters of the bar code, no characters will be stripped.
Strip End Spaces
ON: Any Trailing Spaces will be stripped from the data.
OFF*: No spaces will be stripped.
To Next Page
Loading...
