3.5.5 Stop ping the en gi ne
•
Set the en gine speed le ver (1) to idle (MIN).
•
Al low the en gine to run for 1-2 min utes.
•
Set the en gine speed le ver (1) to «STOP».
Ad di tion ally by electrostart:
•
The charge in di ca tor (4) and the oil pres sure in di ca tor (6)
lights up and a horn (5) sounds.
•
Turn the ig ni tion key (3) to «0». The horn will sound if the ig ni -
tion key is not re turned to the «0» po si tion; a risk of to tal bat -
tery dis charge ex ists.
•
Re move the key.
LM22020000-2 HbmG gnu thci dreV nna mmA 8102/20
At the end of a work ing day or a break pro tect the
key from un author ised ac cess.
3. Operation
48
To Next Page
Loading...
