Ammann ARW 65 - Switching Off the Hatz Engine

3.5.5 Switch ing off the en gine
• Set the en gine speed con trol le ver (1) to «MIN».
• Pull the stop le ver (3) and hold it un til the en gine stops.
Ad di tion ally with elec tro start
• The load in di ca tor lamp (6) lights up.
• Turn the ig ni tion key (5) to «0», the load indicador lamp (6)
should go out.
If the starter key is not re turned to «0», the sig nal ling de vice (7)
will sound; there is a risk of the bat tery be ing to tally drained.
• Re move the ig ni tion key (5).
Attention
Do not switch off the en gine us ing the
decompressor le ver
B6599009.cdr
3
Danger
At the end of a work ing day or a break pro tect the
ig ni tion key from un author ised ac cess.
3. Op er a tion
53