Ampeg Micro-VR User Manual

3
MICRO-VR Bass Guitar Amplifier
Here are some of the features packed into your new MICRO-VR amplifier:
• Detailed 1970s-era SVT appearance
• Designed as a stack with the SVT 210AV cabinet (available separately)
• Single channel, entirely solid-state design
• Selectable 15 dB Input Pad
• Gain control
• Bass, Mid, and Treble controls
• Volume control
• Selectable Limiter and LED
• Peak LED
• Auxiliary Input
• Headphone Output
• Illuminated Power Switch
• Eects Loop with separate Send and Return jacks
• Balanced XLR Output
• Lightweight Switching Power Supply
• Voltage Selector Switch
• MOS-FET power amplier rated at 200 Watts RMS into 4 Ω
• Fan cooled
• Much smaller than Stonehenge
Stonehenge
MICRO-VR
MICRO-VR and
SVT-210AV Cabinet

Ampeg Micro-VR Specifications

Power Output

output power rating at 8 Ω	150 Watts RMS
output power rating at 4 Ω	200 Watts RMS

Signal and Gain

signal to noise ratio	72 dB
maximum gain	62 dB

Tone Controls

bass control	+14/–12 dB @ 40 Hz
midrange control	+5/–13 dB @ 500 Hz
treble control	+19/–25 dB @ 8 kHz

Power Requirements

power requirement for 100–120 VAC	150 W
power requirement for 220–240 VAC	150 W
frequency	50–60 Hz

Weight and Dimensions

size (H x W x D) in inches	7.5 in x 12 in x 10 in
size (H x W x D) in millimeters	190 mm x 305 mm x 254 mm
weight in pounds	9.9 lb
weight in kilograms	4.5 kg