Ampeg SVT-810E Owner's Manual

SVT-810E/AV Dual Bass Cabinet
6
Technical Specications
Type 8x10 / Dual 4x10 Bass Enclosure
Frequency Response (+/–3 dB) 58 Hz – 5 kHz
Usable Low Frequency (–10 dB) 40 Hz
RMS Power Handling Combined / Mono Mode: 800 Watts 8x10
Split / Dual Mode: 400 Watts each 4x10
Peak Power Handling Combined / Mono Mode: 1600 Watts 8x10
Split / Dual Mode: 800 Watts each 4x10
Impedance Combined / Mono Mode: 4 Ω 8x10
Split: 8 Ω each 4x10
Sensitivity Combined / Mono Mode: 100 dB SPL 1W/1m
Maximum SPL 130 dB
Components Eight Custom Designed, 150 Watt, 10” speakers
Size (H x W x D) 48.0 in (with feet) x 26.0 in x 16.0 in
1219 mm (with feet) x 660 mm x 407 mm
Weight (approximate) 165 lb
74.84 kg
The SVT-810E/AV is covered with a durable fabric-backed vinyl material. Clean with a dry, lint-free cloth. Never spray
cleaning agents on the SVT-810E/AV. Avoid abrasive cleansers which would damage the finish.
Ampeg continually develops new products and improves upon existing ones. For this reason, the specifications and
information in this manual are subject to change without notice.
CAUTION: THIS SPEAKER IS CAPABLE OF PRODUCING HIGH SOUND PRESSURE LEVELS. CONTINUED
EXPOSURE TO HIGH SOUND PRESSURE LEVELS CAN CAUSE PERMANENT HEARING IMPAIRMENT OR LOSS.
USER CAUTION IS ADVISED. AND EAR PROTECTION RECOMMENDED IF UNIT IS OPERATED AT HIGH VOLUME.

Ampeg SVT-810E Specifications

General

Amplifier class	-
Frequency range	58 - 5000 Hz
Audio output channels	- channels
Peak power per channel	800 W
Signal-to-Noise Ratio (SNR)	- dB
Total Harmonic Distortion (THD)	- %
Product color	Black
Connectivity technology	Wired
Package weight	74800 g

Weight and Dimensions

Depth	406.4 mm
Width	660.4 mm
Height	1219 mm
Weight	63500 g