To Next PageTo Next Page
Need help?Do you have a question about the Amphenol H4 Series and is the answer not in the manual?
General| Contact Material | Copper Alloy |
|---|---|
| Series | H4 |
| Flammability Rating | UL94 V-0 |
| Category | Connectors |
| Contact Plating | Tin |
| Contact Gender | Male/Female |
| Mounting Type | Cable Mount |
| Termination | Crimp |
Displays visual information and diagrams for various Amphenol H4 series connectors.
Details the logic code for generating Amphenol H4 connector part numbers based on specifications.
Explains the part number logic for reel-type stamping forming contacts for H4 connectors.
Lists and illustrates specialized tools essential for Amphenol H4 connector assembly and crimping.
Provides step-by-step instructions for preparing and stripping cables for proper Amphenol H4 connector insertion.
Details the procedure for crimping cold forming contacts using specific Amphenol tools and locators.
Explains the process of crimping stamping forming contacts, including tool usage and pull-out force requirements.
Guides on assembling Amphenol H4 connectors onto cable ends, including contact insertion and seating.
Specifies the correct torque range for tightening the back cap of Amphenol H4 and H4-H connectors.
Contains important notes on cable specifications, conductor counts, and testing requirements for Amphenol H4 assembly.
Provides instructions for mounting Amphenol H4 connectors onto panels or bulkheads, including hole drilling and sealing.
Describes how to mate and un-mate Amphenol H4 series connectors, including tool recommendations for disconnection.
