Amprobe TACH-10 - Auto Power Off Function; Specifications

6

The meter turns OFF automatically after 20 minutes of
inactivity. To disable the sleep mode, hold down POWER
and UNIT keys simultaneously to turn on the meter. First,
release POWER key, and it shows " n " on the LCD (Fig. 3).
Then release UNIT key and it enters measuring mode in
non-sleep status.


 10.0~99999RPM
 10.0~19999RPM
 1.0000~9999.9M/Min
3.0000~30000Ft/Min
1.0000~10000Yd/Min

 0.001/0.01/0.1/1
 0.0001/0.001/0.01/0.1
 0.0001/0.001/0.01/0.1
 0.0001/0.001/0.01/0.1

 +/-(0.1% of rdg.+2 digit)
 0 to 50
o
C (32˚ to 122˚F)
 Humidity < 80%
 -10 to 50
o
C (14˚ to 122˚F)
 Humidity < 90%
 165(L)x51(W)x32(H)mm
(6.5 x 2 x 1.26 IN)
Fig 3.