Specifications
Electrical
Distortion: Less than 0.03% at 1KHz, full output.
Dynamic Range: 90dB.
Frequency Response: 20Hz to 18KHz : - 3dB, + 0dB.
S/N Ratio: Dependent upon reverberation program selected
but typically 86dB.
Nudge:
Program: Will nudge through programs allowing quick selection of
program required.
Pre-delay: Nudges from 0 to maximum in steps of 10 milliseconds.
Decay time: Nudges from 0 to maximum in 0.1 second steps.
Decay filtering: Nudges up and down in single digit steps.
Keypad Control:
Program Entry: Keypad entry 1 to 18.
Pre-delay Entry: Keypad entry 0 to maximum (dependent upon program
selected), least significant digit = 1mS
Decay Time Entry: Keypad entry least significant digit = 0.1 Second '*' acts
as decimal point.
Filter settings: Keypad entry of signed single digit numeric. '*' acts as
minus sign. Positive value implied if digit not preceded by
'*'.
Display Comprises: 11 x 7 Segment digital characters with 8 x 17 Segment
star burst alphanumeric characters.
RMX-16 Digital Reverberation System - 13 - Issue 1
To Next Page
Loading...
