Need help?Do you have a question about the AMX NXB-CCG-K and is the answer not in the manual?
General| Model | NXB-CCG-K |
|---|---|
| Category | Gateway |
| Storage | 8 GB eMMC |
| Digital Input Ports | 4 x digital input |
| Memory | 2 GB RAM |
| Operating System | Linux |
| USB | 1 x USB 2.0 |
| HDMI Output | 1 x HDMI 2.0 |
| Audio Output | 3.5mm audio jack |
| Relay Ports | 2 x relay outputs |
| Serial Ports | 1 x RS-232 |
Clear Connect Enabled, occupancy sensing for energy conservation, and simple web configuration.
Specifies power consumption, surge protection, and power failure memory for the device.
Instructions for mounting the unit vertically or horizontally, including clearance requirements.
Instructions for connecting the NXB-CCG-K via Ethernet using CAT5 cable.
Details the recommended placement and range for RF devices relative to the NXB-CCG-K.
Steps to connect the DC adapter to the NXB-CCG-K and a power receptacle.
Steps to access the NXB-CCG-K web interface via its IP address and login.
Details the network and security settings configurable via the Settings tab.
Explains reset, update functions, DHCP, security, and language settings.
Steps to create a new web login username and password for the device.
Procedure to change the password for an existing web login.
How to remove a web login user from the system.
Manages integration logins for SSH or raw socket integration.
To Next Page