Mounting Options
FUSEBOX X can be orientated and configured in several ways;
VERTICAL (TALL)
As standard, it comes as a vertical desktop unit just like Telemark.
HORIZONTAL (FLAT)
It is possible to reconfigure it so that it is a flat table top unit, like its cousin Leipzig-3
is. This requires some minor screwdriver work. Essentially remove the 5 front panel
black screws, rotate the front panel 180 degrees, then re-screw.
Note: It was designed to best be used in the tall orientation.
RACKED
Remove the wood sides and fit optional rack ear brackets, and rack mount the whole
assembly. 7U height.!
To Next Page
Loading...