Interval Generator
The IG is a creative and simple way to transpose your Sequence and Pattern in real
time using push buttons.
It’s like a 6 key keyboard, where you can set the pitch of each to any note you want.
There are 6 push buttons - each with an interval amount control.
To activate the IG use the rocker switch.
When UP
Off / no transposition.
When Down
All three VCOs are transposed.
To use:
Switch the IG on, by pushing the rocker to the up position.
Then in turn, turn on each IG push button. Set the interval amount you require using
the analogue control (they are not quantised).
Then move onto the next push button and set that and the remainder to the interval
levels you need for your performance.
To Next Page
Loading...