STEP1
If the Sequencer is running, then each time the sequencer loops, a trigger will be
sent out of this socket. Use this to trigger other circuits, for instance, the Interval
Generator CLOCK IN.
M.CLOCK
When Fusebox receives MIDI Clock, a 16th pulse will be sent out of this socket. Use
to clock the Sequencer or Patternator.
GATE
When using MIDI, when you play notes this socket will output a Gate voltage.
VELOCITY
When using MIDI, this socket will output MIDI Velocity as a voltage.
NOTE0
When using MIDI, this socket will output a trigger whenever NOTE0 is played. Use
to create your own custom ‘MIDI Clock streams’ by programming a stream of NOTE0s
into your DAW. See further notes about use of NOTE0 elsewhere in this manual.
To Next Page
Loading...