ANALYTICAL FLOW TECHNOLOGIES DENSITRAK D625 - Product Specifications

D625 Users Manual
10
PRODUCT SPECIFICATIONS
ANALYTICAL FLOW TECHNOLOGIES D625 Product Specifications Chart
Density Operating Range
0.40 – 2.00 grams/cubic centimeter [gr/cm
3
]
Maximum Density Span
0.70 gr/cm
3
(range can be extended with reduction in accuracy)
Density Resolution
0.0001 gr/cm
3
Meter Accuracy
0.0001 gr/cm
3
Repeatability
Better than 0.01%
Operating Temperature
Standard: 50°F to 140°F [10°C - 60°C]
Optional: 32°F to 203°F [0°C - 95°C]
MAX Temp. Differential
ΔT
max
= 90°F [50°C]
Operating Pressure
Range: 0 to 2,220 PSI [0 – 149 bar]
ANSI Flanged same as flange rating at 100°F
Hydrostatic Test: 1.5 times line pressure
Flow Rate
MIN: .25 Gallons per Minute (GPM)
MAX: 30 GPM
Frequency Signal Output
Nominal 0.30 kHz to 3.0 kHz
Temperature Sensor
3 Wire 100Ω Pt RTD
Power Requirement
VOLTAGE: 24 V
DC
CURRENT: 30 – 50 mA nom.
Materials of Construction
Standard Wetted Parts: 316/316L Stainless Steel,
HASTELLOY® C276
Non-Wetted Parts: 304 Stainless Steel
Electrical Classification
Designed to meet NEC/CSA Class 1, Div. 1, Group C & D, CE Mark
Housing Approved: CSA, FM, EExd, UL
RoHS Compliant
Physical Dimensions
SEE APPENDIX DRAWING
Shipping Weight: Approx. 16 pounds