ANALYTICAL FLOW TECHNOLOGIES DENSITRAK D625 - D625 Meter Display

D625 Users Manual
20
D625 METER – ELECTRICAL CONNECTIONS
The D625 Meter display cycles through three screens, one every three seconds. Display
information can also be collected from the meter using the outputs on the customer interface board,
refer to DENSI-Trax Software User Manual for more detail.
The D625 display can be seen through the
enclosure’s display lenses. Units shown here are
the default settings, they can be changed in the
provided DENSI-Trax software.
Screen 1;
1. Line 1; Period, displayed to three decimal places,
units (seconds).
2. Line 2; Frequency, displayed to whole number, units
(1/seconds).
Screen 2;
1. Line 1; D (U) (uncompensated density),
displayed to five decimal places, units (g/cm
3
).
2. Line 2; Pressure, displayed to one decimal,
units (psi).
Screen 3;
1. Line 1; DENS (fully compensated density), displayed
to five decimal places, units (g/cm
3
).
2. Line 2; Fluid Temperature, displayed to one decimal,
units (ᵒF).
D625 Meter Display