Need help?Do you have a question about the Angelo Po FX122G2 and is the answer not in the manual?
Diagram showing electrical and gas connection points for the oven.
Details water supply requirements and specifications for optimal appliance operation.
Explains oven operation with motorised valve opened or closed for different cooking modes.
Describes cooldown, steam condensing, and steam production processes within the oven.
Overview of electronic board components and their general layout for Level 3 models.
Guide to accessing and using the oven's service menu for diagnostics and settings.
Information on the inverter, its function, and fuse descriptions for system protection.
Overview of electronic board components and their general layout for Level 2 models.
Detailed description of fuses used in the FX model, including their ratings and locations.
Explains premixed system principles and oven power distribution schemes.
Identifies and describes key components of the gas system like valve, mixer, and burner.
Explains the step-by-step logic of the blower control board and ignition cycles.
Procedure for gas system setup, combustion analysis, and recommended values.
Guide to diagnosing and resolving gas alarms and burner issues.
Instructions for gas conversion and performing gas tests on Level 2 ovens.
Details the components and operation of the washing circuit for Level 3.
Procedure for pump testing, and steps for handling washing cycle interruptions.
Table of washing alarms, their solutions, and cleaning consumption data.
Explanation of cleaning warnings, blockages, and descaling notifications.
Identifies components of the washing circuit for Level 2 ovens.
Instructions for replacing encoder, motor, door micro-switch, and glass frame.
Steps for replacing core probe, humidity probe, halogen lamp, and door lock.
Instructions for replacing spark plug, blower fan, CPU, and display LCD boards.
Procedure for Roll-In adjustment and the recommended maintenance schedule.
Troubleshooting for water (H2O) and gas (GAS) alarms, including pressure issues.
Troubleshooting for door (OPE), cleaning (CLE), and various probe failure alarms.
Details on electronic board diagnostics, configuration errors, and system communication issues.
To Next Page
General