EasyManua.ls Logo

Angelo Po FX202E3 - User Manual

Angelo Po FX202E3
125 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Copyright by Servizio Clienti ANGELO PO Spa
1
Rev.1
LEVEL 1 and 2
LEVEL 3
LEVEL 2

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Angelo Po FX202E3 and is the answer not in the manual?

Summary

3. Electronic Boards, Inverter, Fuses, and Overload Relays

3.2. Service Menu Access

Describes accessing and navigating the oven's service menu.

3.3. Component Replacement Procedures

Lists procedures to follow after replacing specific oven components.

3.6. Explanation Table for Boards

Details procedures to follow after replacing specific components.

4. Operation Testing, Adjusting, and Gas Circuit Alarms

4.4. Gas Setup and Adjustment

Outlines procedures for setting up and adjusting the gas system.

4.5. Test Setup Wizard Problems

Lists problems during gas setup and their solutions.

4.8. Gas Alarms and Burner Problem Solving

Provides solutions for gas alarms and burner issues.

5. Washing Cycles Levels 3

5.4. Washing Alarms Table

Lists washing cycle control alarms and their solutions.

6. Washing Cycles Levels 2

7. Dismantle and Reassembly Components

7.17. Scheduled Recommended Maintenance

8. Alarms

H2 O and GAS Alarms

Describes alarms related to water supply and gas/flame detection.

Operational and Probe Failure Alarms (OPE, CLE, E01-E03)

Alarms for door, cleaning, and various probe failures.

Component and Board Failure Alarms (E04-E13)

Alarms for valve, motor, board, overheating, and communication.

Configuration, Test, and System Alarms (E14-E28)

Alarms for configuration, tests, washing, and system errors.

Final Alarms (E29-E38, E80-E85)

Alarms indicating probe issues or general diagnostics requiring service.

Summary

3. Electronic Boards, Inverter, Fuses, and Overload Relays

3.2. Service Menu Access

Describes accessing and navigating the oven's service menu.

3.3. Component Replacement Procedures

Lists procedures to follow after replacing specific oven components.

3.6. Explanation Table for Boards

Details procedures to follow after replacing specific components.

4. Operation Testing, Adjusting, and Gas Circuit Alarms

4.4. Gas Setup and Adjustment

Outlines procedures for setting up and adjusting the gas system.

4.5. Test Setup Wizard Problems

Lists problems during gas setup and their solutions.

4.8. Gas Alarms and Burner Problem Solving

Provides solutions for gas alarms and burner issues.

5. Washing Cycles Levels 3

5.4. Washing Alarms Table

Lists washing cycle control alarms and their solutions.

6. Washing Cycles Levels 2

7. Dismantle and Reassembly Components

7.17. Scheduled Recommended Maintenance

8. Alarms

H2 O and GAS Alarms

Describes alarms related to water supply and gas/flame detection.

Operational and Probe Failure Alarms (OPE, CLE, E01-E03)

Alarms for door, cleaning, and various probe failures.

Component and Board Failure Alarms (E04-E13)

Alarms for valve, motor, board, overheating, and communication.

Configuration, Test, and System Alarms (E14-E28)

Alarms for configuration, tests, washing, and system errors.

Final Alarms (E29-E38, E80-E85)

Alarms indicating probe issues or general diagnostics requiring service.

Angelo Po FX202E3 Specifications

General IconGeneral
BrandAngelo Po
ModelFX202E3
CategoryOven
LanguageEnglish

Related product manuals