Need help?Do you have a question about the Angelo Po FX201G2 and is the answer not in the manual?
Explains the oven’s function when the motorised valve is open.
Explains the oven’s function when the motorised valve is closed.
Details the process of cooling down and condensing steam.
Describes the process of generating steam.
Provides a layout of electronic boards for Level 3 ovens.
Outlines various functions and settings accessible via the Service menu.
Details the inverter's function, cooling, and alarm troubleshooting.
Outlines the layout of electronic boards for Level 2 ovens.
Details the purpose and location of various fuses in FX models.
Explains the general principles of the oven's gas system operation.
Identifies and illustrates the various components of the gas system.
Describes the step-by-step logic of the blower and combustion control boards.
Guides through gas setup, recommended combustion values, and adjustments.
Provides solutions for gas alarms and burner operational issues.
Details the gas testing procedure for Level 2 ovens.
Explains the components and operation of the washing circuit in Level 3 ovens.
Details the steps for testing the washing circuit pumps and functionality.
Provides guidance on how to manage and exit interrupted washing cycles.
Lists washing cycle alarms, their problems, and solutions.
Details the components and operation of the washing circuit in Level 2 ovens.
Provides instructions for dismantling and reassembling the encoder.
Offers steps for dismantling and replacing the oven motor.
Offers instructions for replacing the spark plug and its gasket.
Explains how to access and replace CPU and LCD boards for LIV.3.
Instructions for performing roll-in adjustments on RX201 and RX202 models.
Outlines recommended maintenance tasks categorized by model type and frequency.
Details alarms related to water supply and pressure issues.
Lists alarms associated with gas supply or flame detection failures.
Addresses issues with the cooking chamber probe's connectivity or failure.
Details alarms for the product core probe, indicating failure or disconnection.
Addresses alarms related to electronic circuit board diagnostics and communication failures.
Details alarms related to inconsistencies in oven configuration.
To Next Page
General