Need help?Do you have a question about the Angelo Po FX Series and is the answer not in the manual?
Provides diagrams for connecting electric and gas lines to the oven.
Details the required water quality parameters for optimal appliance operation.
Explains the functional process when the motorized valve is open.
Describes the functional process when the motorized valve is closed.
Details the operation of draining, cooling, and condensing steam.
Explains the process of generating steam within the oven.
Overview of the electronic board layout for Level 3 models.
Instructions for accessing and using the oven's service menu.
Table outlining procedures to follow after replacing specific oven components.
Information and operating details regarding the oven's inverter.
Overview of the electronic board layout for Level 2 models.
Procedures for component replacement specific to Level 2 systems.
Details the purpose and location of various fuses within the FX series.
Explains the fundamental principles of the oven's system operation.
Describes the different power levels and operational schemes.
Identifies and illustrates the various components of the gas system.
Specifics and approval information for the gas valve.
Details the function and characteristics of the air-gas mixer.
Information about the air blower fan, its power supply, and control.
Details and notes regarding the blower control board.
Information and specifications for the combustion control board.
A schematic showing the overall functional connections of the gas system.
Description and notes for the spark plug and flame detector assembly.
Illustrations and notes related to the burner assembly.
Information on the heat exchanger, its materials, and efficiency.
Guidelines for installing the exhaust extraction kit.
Explains the step-by-step logic and operation of the blower control board.
Details the standard ignition cycles and their operational phases.
Describes the F4 alarm for missing flame and its causes.
Procedure for setting up the gas system and performing tests.
Lists recommended CO2 and CO values for combustion analysis.
Guidance on adjusting the gas valve during the setup test.
Instructions for changing combustion control board parameters.
Lists common problems during gas test setup and their solutions.
Steps and recommendations for performing gas flue analysis.
Instructions for completing the installation and warranty report.
Guide to identifying and resolving gas alarms and burner issues.
Steps for converting the oven to use different types of gas.
Step-by-step guide for performing gas tests on Level 2 ovens.
Requirement and procedure for annual gas flue analysis.
Description of the washing circuit and its constituent parts.
Procedure for testing the washing circuit pumps and functionality.
Steps to take when a washing cycle is interrupted.
Table detailing washing cycle alarms and their corresponding solutions.
Table showing detergent, sanitizer, and water consumption for cleaning cycles.
Explanation of cleaning warnings and blockage screens.
Notification and procedure for when descaling is required.
Description of the washing circuit components specific to Level 2 ovens.
Step-by-step guide for removing and installing the encoder.
Procedure for disassembling and replacing the oven motor.
Instructions for replacing the door micro-switch.
Guide on how to disassemble the door glass frame.
Details on the cooling system parts and air intake slots.
Steps for adjusting the oven door alignment.
Instructions for replacing the core probe.
Steps for removing and installing the humidity probe.
Procedure for replacing the halogen lamp.
Instructions for dismantling the oven door lock mechanism.
Specific instructions for dismantling the lock on 20-tray models.
Step-by-step guide for replacing the spark plug.
Procedure for replacing the blower fan assembly.
Instructions for replacing CPU and LCD boards on LIV.3 models.
Guide for replacing the CPU board in its first version.
Guide for replacing the CPU board in its second version.
How to connect and disconnect flat cables for the LCD display.
Instructions for connecting flat cables to LED board and keyboard.
Procedure for removing and installing a new LCD display.
Instructions for replacing LIV.3 CPU/LCD boards, 2nd version.
Details on using a kit to update ovens to the 1st version CPU.
Procedure for adjusting RX201 and RX202 roll-in oven models.
Schedule and tasks for recommended periodic maintenance.
To Next Page
General