To Next Page

To Previous Page

105

7.11. Lock dismantling 20 trays models

To replace the lock, follow the instruction below:

1. remove the cap of the handle using a thin screwdriver ( picture 1);

2. unscrew the handle securing screw (picture 2);

3. disassemble the handle from its seat (picture 3)

4. remove the blocking lock by unscrewing the three screws on the door (picture 4);

5. pay attention to the washers on lock of the handle (picture 5);

6. Unscrew the screw rear handle lock for its removal (picture 6);

7. to access the lock assembly (picture 7) remove the panel behind the lock (picture

8);

PICTURE 4 PICTURE 3

PICTURE 2

PICTURE 1

Angelo Po FX Series User Manual

Questions and Answers: