ALERTS ICONS
1 2 3 5 6 74
1 11 1 1 1
1
Sensor Pad alert: If after 20 seconds
there is NO movement detected both the
Parent Unit and Nursery Unit speakers will
emit loud consecutive beeps - this is the
movement alarm.
2
Sensor Pad is paused
3
Sensor Pad lost link: Parent Unit and
Nursery Unit speakers will emit loud
consecutive beeps.
4
Sensor Pad battery is low: Parent
Unit will emit 3 consecutive beeps, every
5 seconds.
5
Parent Unit is out-of-range: Parent Unit will
emit 2 consecutive beeps, every 10 seconds.
6
Temperature is too cold: Parent Unit will
emit 3 consecutive beeps, every 5 seconds.
7
Temperature is too hot: Parent Unit will
emit 3 consecutive beeps, every 5 seconds.
Note: Press any key to stop alarm and make the alert icon disappear.
In the case of a Sensor Pad alarm, the monitor will Pause the Sensor Pad. In Pause mode, the
movement detection feature is disabled. To reactivate the Sensor Pad, simply un-pause the
Sensor Pad into the first menu.
12
To Next Page
Loading...
