Anglecare AC327 - General Settings Menu; Pairing Menu

• To confirm your settings, you’ll always need to press the button. A confirmation icon will
then appear on the screen: Settings have been saved Settings have not been saved
• If you have 2 Nursery Units & 2 Sensor Pads paired with your monitor, you can only change
the settings of the viewing Nursery Unit.
• If a function icon appears in grey (grayed out) it means you are unable to use or adjust.
IMPORTANT
TEMPERATURE SETTINGS MENU
22 16 OFF
o
C
1 2 3 4
1
Set warmer temperature alarm
2
Set colder temperature alarm
Note: e range between the minimum and
maximum temperature can not be less than
4°C / 7°F.
3
Set Celsius or Fahrenheit display
4
Activate the temperature alarm
GENERAL SETTINGS MENU
3 MIN
1 2 3 4
1
Sleep Mode Set-Up
2
Set Sensor Pad sensitivity:
To ensure adequate monitoring of your
child’s movements, you can adjust the
sensitivity of the Sensor Pad.
3
Set Nursery Unit speaker volume
4
Pairing Menu
PAIRING MENU
1 2 3
1
Nursery Unit 1 Status
2
Nursery Unit 2 Status
3
Sensor Pad 1 Status
Nursery Unit and Sensor Pad Status
Icons:
Green: Connected/Paired.
Blue: Add a Nursery Unit or Sensor Pad.
Red: Remove Nursery Unit or Sensor Pad.
Confirmation process ON THE SCREEN:
Blue: ‘’Link’’ icon animation when
pairing (Linking timeout: 60s).
Green: Successful pairing.
Red: Failed pairing, please try again.
E
N
11