EasyManua.ls Logo

Anglecare AC327 - Hazard Warnings and Precautions; Strangulation Hazard Warning; Sensor Pad Interference Issues

Anglecare AC327
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3. DO NOT use a cot mobile and other cot
accessories that may produce movements or
vibrations.
4. Fans (including ceiling), washing machines, floor
boards, central heating or loud music are all forms
of movement and vibration and may interfere and
be detected by the Sensor Pad.
5. If an additional Nursery Unit is added then it
must be positioned at least 2 metres minimum
from Nursery Unit 1 and Sensor Pad as this could
interfere with performance.
6. DO NOT use with bedside cot touching parent’s/
carer’s bed as the Sensor Pad will detect your
movements.
7. DO NOT place the cot against a wall or skirting
board as vibrations may be detected.
8. Following removal of baby from the cot, some
mattresses may still detect mattress movement
due to it forming back into shape and alarm may
not sound.
9. Ensure cot is stable to eliminate any movement.
10. Cot should not be placed in reaching distance
of another cot or bed.
11. DO NOT use other wireless devices in the same
room as the monitor (including mobile phones,
microwaves...). ey may interfere with signal and
performance.
12. e Sensor Pad is made of plastic and does
not permit air to circulate. erefore, mildew
build up could develop underneath the mattress in
the Sensor Pad area.
We suggest rotating & airing /drying the mattress
regularly to prevent any mildew. AVOID CONTACT WITH
MOISTURE. Clean - wipe with a dry lint free cloth.
13. e Sensor Pad is not suitable for use
above age 24 months.
14. is product cannot replace responsible
adult supervision.
is product is designed to aid in the monitoring
of your child. When using the monitor, you must
still provide the supervision necessary for the
continued safety of your child.
WARNING
- MOVEMENT SENSOR PAD - NO ALARM
Sources of vibration & movement, other than your baby’s, can be detected by
the Sensor Pad and interfere with the performance of your Angelcare monitor.
e alarm will not sound if it detects movement other than your baby’s.
High sensitivity settings can pick up other sources of vibration & movement -
please read instructions on sensitivity setting to adjust accordingly.
Other active and older babies (toddlers) in the same room can be detected and
the alarm will not sound.
Ensure the baby’s environment is FREE from any movements or vibrations when
using the Sensor Pad - see below warnings 3 to 11.
2
is baby monitor is compliant with all relevant standards regarding electromagnetic fields and is,
when handled as described in the User’s Guide, safe to use.
WARNINGS
1. Because of the serious strangulation risk to infant & toddlers, parents & caregivers should
note the following Warnings.
2.
WARNING
- Strangulation Hazard –
Children have STRANGLED in cords
KEEP the Nursery Unit and adaptor cords OUT of the
reach of children more than 1 metre away.
NEVER use extension cords with adaptors. ONLY use
adaptors provided.
is product is NOT a Toy. NEVER allow children to
play with it.
2

Related product manuals