Animo OptiMe - Page 28

OptiMeOptiMe
2021/01 Rev. 0.4
28 / 38
Problem
Possible
cause
Solution
(continuation)
Milk spouts
from dispensing
outlet
Air valve [G]
adjustment / fixation
needs attention
Check if the air valve [G]
needs re-adjustment.
Check if the air valve [G] and
stainless steel coupling are
properly tightened.
Problem
Possible
cause
Solution
Poor or no milk
foam quality
from dispensing
outlet
No air intake
Check if the air valve [G]
needs re-adjustment.
No air intake
Check the duckbill valve
[D2] for:
Correct assembly
Correct function and contam-
ination.
Clean or replace if neces-
sary.
Art.no. duckbill valve:
1007799