DESCALE CYCLE
DESCALING STEPS
1. Remove all accessories. Put the solid pan
on the bottom of the cavity so that the
Descale drain outlet is protruding out over
the edge of the tray to catch liquids. See
fig. 2.
2. Remove and empty the water tank, then
re-attach to the oven.
3. Mix 3/4 Cup (about 200 mL) descaling
solution with 1 Quart (1 L) water, and pour
into the Water Tank.
4. Activate the Descale cycle by pressing
the
on the Display or
in the App. The first phase is about 30
minutes.
5. After the end of the first stage, make sure
there is no remaining cleaning solution
inside the Water Tank. If there is, remove
the tank, empty the solution, rinse the
tank with water, and re-attach.
6. Add 1 Quart (1 L) distilled water to the
Water Tank.
7. Activate the second phase of the cycle by
pressing the
on the
Display or in the App. The second phase
is about 10 minutes.
8. When the cycle is complete, remove the
solid pan and clean the pan.
9. Wipe away any moisture inside of the
Oven with a dry cloth. Let it dry fully with
the door open.
To Next Page
Loading...
