Anritsu MT8821C - Page 160

160
Table 3.8-2: 3GPP Test Items and Test Parameters (2/5)
3GPP Test Item
No.
Test Parameter
6.3.5.1 Power Control Absolute power tolerance
24
TX3 - Absolute Power (Test Point1)
25
TX3 - Absolute Power (Test Point2)
6.3.5_1.1 Power Control Absolute power tolerance for
HPUE
24
TX3 - Absolute Power (Test Point1)
25
TX3 - Absolute Power (Test Point2)
6.3.5A.1.1 Power Control Absolute power tolerance
for CA (intra-band contiguous DL CA and UL CA)
24
TX3 - Absolute Power (Test Point1)
25
TX3 - Absolute Power (Test Point2)
6.3.5.2 Power Control Relative power tolerance
32
TX3 - Relative Power (Ramping Up A)
33
TX3 - Relative Power (Ramping Up B)
34
TX3 - Relative Power (Ramping Up C)
35
TX3 - Relative Power (Ramping Down A)
36
TX3 - Relative Power (Ramping Down B)
37
TX3 - Relative Power (Ramping Down C)
38
TX3 - Relative Power (Alternating)
6.3.5_1.2 Power Control Relative Power Tolerance for
HPUE
32
TX3 - Relative Power (Ramping Up A)
33
TX3 - Relative Power (Ramping Up B)
34
TX3 - Relative Power (Ramping Up C)
35
TX3 - Relative Power (Ramping Down A)
36
TX3 - Relative Power (Ramping Down B)
37
TX3 - Relative Power (Ramping Down C)
38
TX3 - Relative Power (Alternating)
6.3.5A.2.1 Power Control Relative Power Tolerance for
CA (intra-band contiguous DL CA and UL CA)
32
TX3 - Relative Power (Ramping Up A)
33
TX3 - Relative Power (Ramping Up B)
34
TX3 - Relative Power (Ramping Up C)
35
TX3 - Relative Power (Ramping Down A)
36
TX3 - Relative Power (Ramping Down B)
37
TX3 - Relative Power (Ramping Down C)
38
TX3 - Relative Power (Alternating)
6.3.5.3 Aggregate power control tolerance
39
TX3 - Aggregate Power (PUSCH Sub-test)
40
TX3 - Aggregate Power (PUCCH Sub-test)
6.3.5_1.3 Aggregate power control tolerance for
HPUE
39
TX3 - Aggregate Power (PUSCH Sub-test)
40
TX3 - Aggregate Power (PUCCH Sub-test)
6.3.5A.3.1 Aggregate power control tolerance (for CA
(intra-band contiguous DL CA and UL CA)
39
TX3 - Aggregate Power (PUSCH Sub-test)
40
TX3 - Aggregate Power (PUCCH Sub-test)