Anritsu MT8821C - Page 7

7
Measurement Item
Specifications
Measurement object PUSCH, PRACH, PUCCH
Occupied Bandwidth
Frequency 400 to 2700 MHz
3400 to 3800 MHz
(Can be used when installing MT8820C-018 option)
Input level –10 to +35 dBm (Main1)
Adjacent Channel
Leakage Power
Frequency 400 to 2700 MHz
3400 to 3800 MHz
(Can be used when installing MT8820C-018 option)
Input level –10 to +35 dBm (Main1)
Measurement point E-UTRA ACLR1
UTRA ACLR1
UTRA ACLR2
Measurement range ≥45 dB (E-UTRA ACLR1)
≥50 dB (UTRA ACLR1)
≥55 dB (UTRA ACLR2)
Spectrum Emission
Mask
Frequency 400 to 2700 MHz
3400 to 3800 MHz
(Can be used when installing MT8820C-018 option)
Input level –10 to +35 dBm (Main1)
RF Signal Generator
Output frequency 400 to 2700 MHz (1-Hz steps)
3400 to 3800 MHz (1-Hz steps)
(Can be used when installing MT8820C-018 option)
AWGN level Off, –20 to +5 dB (0.1-dB steps,
Relative level with Ior (Total power))
AWGN level accuracy ±0.2 dB (Relative level accuracy with Ior)
Throughput
Measurement
Function Measures throughput using RMC
Measurement object ACK and NACK reported from UE
Call Processing
Call control Position registration, Call processing using RMC
(Executes each processing in 3GPP standards and performs Pass/Fail evaluation)
UE Control Output level
(Executes each UE control in 3GPP standards)