Anritsu MT9083 Series - Page 85

4.6 DISPlay Subsystem Commands
4-33
4
OTDR Commands
4.6.6 DISPlay:ZOOM:VERTical Command
Syntax: DISPlay:ZOOM:VERTical<wsp><level>
Parameters: <level> Zoom level
Numeric format
Range: 0 – 7
0 – Full zoom in, 7 – Full Zoom out
Description: Set Vertical display zoom to specified level
Example: disp:zoom:vert 2
Response: None
Errors: (–224, "std_illegalValue, Invalid Parameter Value")
4.6.7 DISPlay:ZOOM:VERTical? Command
Syntax: DISPlay:ZOOM:VERTical?
Parameters: None
Description: Get Vertical display zoom level
Example: disp:zoom:vert? --- 5<END>
Response: Vertical zoom level as numeric value.
Errors: None