Retrieving Signal Standards Files
Connection Manager must be connected to a test unit before retrieving a Signal Standards
file. An active connection is indicated in the Status Bar at the bottom right corner of the ap-
plication window.
To retrieve a Signal Standards file, select
Retreive Signal Standards from the Connection
menu, or use the short-cut icon on the button bar. The retrieved Signal Standards data will
replace all existing Signal Standards data in the Signal Standards Editor. To store the cur-
rent Signal Standards data locally, select
Save from the File menu and save the current Sig-
nal Standards file before retrieving another the Signal Standards file from a test unit.
Storing Signal Standards Files
To upload the Signal Standards file to a test unit, select Upload Signal Standards from the
Connection menu, or press the short-cut icon on the button bar. This will upload the current
Signal Standards file to the test unit, overwriting any data already on the test unit.
Signal Standards Reports
A signal standards report is generated by selecting the Report function from the File menu.
A signal standards report is an HTML file and can be opened inside the default
web-browser of the PC, where it can be printed if desired.
7-12
Chapter 7 Handheld Software Tools
To Next Page
Loading...
