S331L MM PN: 10580-00323 Rev. B 1-1
Chapter 1 — General Information
1-1 Introduction
This manual provides maintenance instructions for Anritsu Site Master Model S331L. The manual includes:
• General information in this chapter, including:
• Verification Equipment List (Table 1-1)
• Replaceable parts list (Table 1-2)
• Performance verification procedures (Chapter 2, “S331L Performance Verification”)
• Battery pack information (Chapter 3, “Battery Information”)
• Parts replacement procedures (Chapter 4, “Assembly Replacement”)
• Troubleshooting procedures (Chapter 5, “Troubleshooting”)
• Blank test records are included in Appendix A.
• Copy the blank test records from Appendix A and use them to record measured values. These test
records form a record of the performance of your instrument. Anritsu recommends that you make a
copy of the blank test records to document the measurements each time a Performance
Verification is performed. Continuing to document this process each time it is performed provides
a detailed history of instrument performance, which can allow you to observe trends.
Familiarity with the basic operation of the front panel keys (for example, how to change measurement mode,
preset the unit, or the meaning of soft key or submenu) is assumed. Refer to the instrument’s User Guide for
additional information.
1-2 Anritsu Customer Service Centers
For the latest service and sales information in your area, please visit the following URL:
http://www.anritsu.com/contact.asp
From here, you can select the latest sales, select service and support contact information in your country or
region, provide online feedback, complete a “Talk to Anritsu” form to have your questions answered, or obtain
other services offered by Anritsu.
Updated product information can be found on the Anritsu web site:
http://www.anritsu.com/
Search for the product model number. The latest documentation is on the product page under the Library tab.
Example URL for Site Master S331L:
http://www.anritsu.com/en-us/products-solutions/products/s331l.aspx
Caution Before making any measurement, verify that all equipment has warmed up for at least 30 minutes.
To Next Page
Loading...
Need help?
General
