Anslut 004809 - Safety Instructions

EN
40
Otherwise there is a risk of
material damage, noise and/
or vibration.
• Do not cover or block the
appliance – risk of personal
injury, material damage and/
or malfunction.
• Never modify the power cord
or plug. Do not use an
extension cord.
• Connect the appliance to a
separate power circuit. An
incorrect connection to the
mains supply can result in a
risk of re and/or electric
shock.
• Switch o the appliance and
pull out the plug when the
appliance is not in use.
• Do not use the appliance in
damp or wet areas. The
penetration of water can
cause the electronic
components to stop working.
• Do not use the appliance in
explosive environments, such
as in the vicinity of ammable
liquids, gases or dust – risk of
re and/or explosion.
• The appliance has wheels to
SAFETY INSTRUCTIONS
• Always follow the safety
instructions when using
electrical appliances. Failure
to follow all the instructions
and safety instructions can
result in the risk of fatal injury,
electric shock, re and/or
serious personal injury.
• Carry out the installation in
accordance with installation
instructions. Incorrect
installation can cause a re,
electric shock and/or water
leakage.
• Only use the supplied
accessories and parts and the
specied tool for installation.
The use of other parts,
accessories or tools can result
in re, electric shock and/or
material damage.
• Check that the mains voltage
corresponds to the rated
voltage on the type plate.
• The plug must be plugged
into a correctly installed
earthed power point.
• Place the appliance on a
level, stable surface.