47
2023_001
6.2 To dry the evaporator of the
product
Caution! The evaporator inside the product must be dried
out before the unit is stored to avoid component damage
and molds.
There are 2 ways to dry the evaporator:
● Unplug the product and place it in a dry open area for a
few days.
● Set the humidity point more than 5% higher than the
environmental humidity and start the operation for a
couple of hours.
7 Disposal
7.1 To discard the product
● Make sure that you follow local regulations when you
discard the product. Do not burn the product.
8 Technical data
Specification Value
Rated voltage 230 V
Output 330 W
Weight 14 kg
Size 350x235x578 mm
Temperature range 5–35C
Air flow 150/160 m/h
Dehumidifying capacity 20 l/24 h
Tank volume 4 l
Noise level <45 dB
Cord length 1.5 m
Refrigerant R290 (55 g)
To Next Page
Loading...
