Do you have a question about the Antec TRUEPOWER TP-650 and is the answer not in the manual?
Details PSU compatibility with ATX12V v2.3/EPS12V v2.91, Universal Input, and Active PFC.
Explains safety features like OVP, SCP, and OCP, and the PSU's protected shutdown state.
Covers the 80 PLUS® Bronze certification for power supply efficiency and its benefits.
Details NVIDIA SLIM-Ready certification for use with high-end graphics cards.
Explains the hybrid system for reduced clutter and improved airflow.
Discusses DC to DC conversion for voltage regulation, efficiency, and stability.
Explains PWM fan technology for quieter, controlled fan speed.
Describes the double layer PCB design for better airflow and reliability.
Highlights Japanese capacitors for enhanced stability and reliability.
Details voltage output capacity, regulation, and ripple & noise for different rails.
Instructions for connecting the 24-pin main connector and ATX12V connector.
Guidance on connecting modular cables, including PCI-E, to the PSU.
Instructions for connecting the AC power cord and turning on the PSU.
| Wattage | 650W |
|---|---|
| Modularity | Non-modular |
| Form Factor | ATX |
| Cooling | 120mm fan |
| Input Voltage | 100-240V |
| Input Frequency | 50-60Hz |
| MTBF | 100, 000 hours |
| +12V Rails | 2 |
| SATA Power Connectors | 6 |
| 4-Pin Molex Connectors | 4 |
| Floppy Drive Connectors | 1 |
| Over Voltage Protection | Yes |
| Over Power Protection | Yes |
| Short Circuit Protection | Yes |
| Over Temperature Protection | Yes |
| Under Voltage Protection | Yes |
| Efficiency | 80 Plus Bronze |
| Connectors | 6 x SATA, 4 x Molex, 1 x Floppy |
| Type | ATX |
| Main Connector | 24-pin |
| Dimensions | 150mm x 86mm x 140mm |











