Torque value adjustment.
• Set the maximum torque value using buttons (B).
The torque value is expressed in % or Ncm for certified reducers.
The appearance of the symbol (Z) highlights a value reading tolerance of
±20%.
The data set are automatically saved.
Drill rotation at maximum torque.
Select the drill rotation mode when the set maximum torque is reached:
S1 Rotation lock.
S2 Stop normal rotation and reverse rotation.
S3 Stop normal rotation, short reverse rotation and resumption of
normal rotation.
Certified contra angle pre-set list.
Torque tolerance to drill
Kavo LUX 7LP
®
Kavo IntraC 0768 LHC
®
Menu with micromotor extracted and active.
The following functions can be changed:
• adjust the maximum rotation speed of the drill using the buttons “+” or “-
”;
To Next Page
Loading...
