Need help?Do you have a question about the Anthos SMART TOUCH R7 and is the answer not in the manual?
General| Type | Dental X-Ray Unit |
|---|---|
| Technology | Digital |
| Voltage Range | 60-70 kV |
| Control Panel | Touch Screen |
| Hygiene System | Automatic disinfection cycle |
| Power Supply | 230 VAC |
Lists symbols used in the document to denote specific conditions and warnings.
Covers general safety precautions, including installation, modifications, and patient safety.
Details procedures and recommended products for cleaning and disinfecting the equipment.
Provides guidelines and parameters for sterilizing instruments using a steam autoclave.
Details the built-in safety devices that prevent hazardous movements.
Describes devices used to block or stop equipment movement in emergencies.
Describes the function of each button on the dental chair control panel.
Explains the meaning of various warning icons displayed on the touch screen.
Describes the structure and navigation of the dental unit's user interface menu.
Lists possible error messages, their causes, and recommended remedies.
Details how to manage and set data for different operators.
Allows configuration of various system settings like hygiene, hydro unit, and controls.
Covers settings for BIOSTER/S disinfection and Flushing cycles.
Configuration for bowl water, cup water delivery, and automatic bowl movement.
Instructions for setting chair positions like 'rinse', 'home', and programmed positions.
Description and operation of the multifunction foot control.
Information on the wireless foot control, its battery, and operation.
Details the characteristics and settings for the restorative operating mode.
Details the characteristics and settings for the endodontic operating mode.
Outlines the schedule for preventive maintenance checks by authorized personnel.
Specifies the frequency and requirements for safety checks according to standards.
To Next Page
