31
31EN
R7
- OPERATING INSTRUCTION
5.1.1.2.9. Operator data entry
NOTE: the data modied always refers to the operator set on the
main page.
.
.
5.1.1.2.10. LANGUAGE selection
.
NOTE: in the case of the “Rinse position” the position of the bowl
can be saved, if powered.
A
NOTE: Hold down button "SAVE" for at least 2 seconds to quit
without saving the changes made.
AUTOMATIC RETURNRINSE POSITION
B
NOTE: The seat height cannot be changed when in the “RINSE
POSITION”.
NOTE: The “RINSE POSITION” button brings the backrest and
seat into the rinse position.
When button “RINSE POSITION” is pressed again, the backrest and seat
return to the previous position.
To Next Page
Loading...
