41
41EN
R7
- OPERATING INSTRUCTION
5.4. Turbine
Connecting the handpiece and changing the chuck.
Use.
WARNING!
Read the instructions for use of the various turbines.
f
e
NOTE: instrument activation is indicated by the relative manage-
ment page appearing on the TOUCH DISPLAY.
NOTE: The turbine cord can also be used to connect the air micro-
motors equipped with 4-way connector and conform to ISO 13294 - Dental
Air Motor.
Fibre optic brightness adjustment.
.
or .
NOTE: the settable value ranges from 1 to 16.
.
NOTE: after 30 seconds of not using the instrument (foot control
lever deactivated), the bre optics turns o.
To Next Page
Loading...
