4242
EN
R7
- OPERATING INSTRUCTION
Turbine rotation speed change.
NOTE: the data is automatically stored.
Instrument spray control button.
NOTE: the data is automatically stored.
Removable cord
Cleaning and care.
It is recommended to use Daily Oil () for lubrication.
Sterilization.
WARNING!
Carefully read the operating instructions supplied with the handpiece before attempting to sterilize.
Instructions for use.
WARNING!
• The instrument is supplied NOT STERILE and must be sterilized before use (see paragraph 1.5.).
Before performing sterilization, check the instructions for use included with the device.
• Only for American and Canadian markets: instruments must be FDA-approved.
• The turbine must never be started without attaching the chuck or false chuck.
• The chuck release button must be held down during operation!
Friction between the button and micromotor rotor overheats the head and may cause burns.
• The patient’s internal tissues (tongue, cheeks, lips, etc...) must be protected against contact with the button by using suitable instruments (mirror,
etc...).
• The chucks and various instruments attached to the handpieces must comply to the standard ISO 10993-1 Biological evaluation of medical devices.
To Next Page
Loading...
