Anthos SMART TOUCH R7 - Micromotor

43



43EN
R7 - OPERATING INSTRUCTION
5.5. Micromotor
Coupling the handpieces and changing the chuck.


Use.
WARNING!
Also read the instructions for use of the various motors.
The instrument is supplied non-sterile.
• Operating time: work 5 min., rest 5 min.
f 
e 

NOTE: instrument activation is indicated by the relative manage-
ment page appearing on the TOUCH DISPLAY.


 

 
 
 
󰀨
 
 
Fibre optic brightness adjustment.

 .
 or .
NOTE: the settable value ranges from 1 to 16.

 .
NOTE: after 30 seconds of not using the instrument (foot control
lever deactivated), the bre optics turns o.


 

 

 
