EasyManua.ls Logo

Antunes VCT Series - Table of Contents; Overview; Before Use; In Case of Damage

Antunes VCT Series
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Overview
This unit is intended to be used for com-
mercial applications, for example: in kitch-
ens of restaurants, canteens, hospitals and
in commercial enterprises such as baker-
ies, butcheries, etc., But not for continuous
mass production of food.
Before Use
This manual contains safety, installation,
and operating procedures for the unit.
Read and understand it completely before
installing or operating the unit. Keep this
document for reference. If the unit changes
ownership, this manual must accompany it.
In Case of Damage
If the unit arrives damaged, le a claim
with the carrier immediately. Save all pack-
ing materials when ling a claim. Freight
damage claims are the responsibility of
the purchaser and are not covered under
warranty.
Website
www.antunes.com
Service/Technical
Assistance
In Case of Damage
If any parts are missing or damaged,
problems with the installation or operation
of this product contact Antunes Customer
Service immediately at +1-877-392-7856
(toll free).
Fill in the information in the next section
and have it ready when calling for
assistance. The serial number is on the
specication sticker located on the system.
Equipment Information to Save
Purchased from:
Date of purchase:
Model number:
Serial number:
Manufacturing number:
Authorized Service Agency
Name:
Phone No:
Address:
Table of Contents
Overview 2
Before Use 2
In Case of Damage 2
Website 2
Service/Technical Assistance 2
In Case of Damage 2
Equipment Information to Save 2
Authorized Service Agency 2
Safety Information Page 3
Installation 3
Operation 3
Maintenance 3
Service 3
Specications 4
Electrical Ratings 4
Electrical Cord & Congurations 4
Dimensions 4
Installation 5
Unpacking 5
Equipment Setup 5
Installing the Bun Chute 5
Operation 6
Recommended Temperatures 6
Recommended Speed Setting 6
Light/Dark Setting 6
Hi-Limit Reset Button 6
Viewing Settings 7
Changing Settings 7
Factory Reset 7
Maintenance 8
Daily Cleaning 8
Quarterly Cleaning 9
Replacing the Belt Wraps 10
Checking the Conveyor Belt Chains 11
Measuring conveyor belt Chains 11
Replacing Conveyor Belt Chains 11
Fault Codes 12
Troubleshooting 13
ReplacementParts 14
Exploded Views 16
Wiring Diagram 20
Notes 21
Limited Warranty 23
®
P/N 1011376 Rev. D 11/20
2

Related product manuals