18
Click the button [OK]. And then try to enter the correct password.
4.2 T5Pro/T5/T5S Management
4.2.1 Add Unit
Click the button [Add Unit]. Following windows pops up:
Terminal No.: This number can be set as you like.
Device ID: Please enter last 8 digit serial number.
Device Name: You can set it as you like.
Device Group: This group is used to manage the terminal machine.
T&A Status: There are three options: Actual Status, on duty and off duty. When
we set it as “Actual Status” the attendance records’ status in the software are as
same they are in the device. If you set it as “ON Duty”, all the records’ status which is
from this machine will be “On duty”.
USB(No driver): connect pc and device using USB cable .
LAN: Input the terminal’s IP address. The default IP address is
192.168.0.218.
LAN (client): Only communication with the PC which has server IP.
USB: Serial communication port.
RS485: The default COM value is COM1;
Click the button [OK] to save the information.
There will display an icon for the new added device terminal
. Put the
mouse on icon, which will show the detailed info of the device:
To Next Page
Loading...
Need help?
General
