Anybus Wireless Bolt - Bluetooth Settings - PANU Mode

AT Commands 19 (88)
3.3.15 AT*BDM GAP Discoverability Mode
AT*BDM=
Set current GAP discoverability mode. For default value see AT*AMDEFAULT.
Syntax:
AT*BDM=<gap_mode>,<store>
Input Parameters:
Name
Type Description
gap_mode Integer The GAP discoverability mode to set:
1: GAP non-discoverable mode
2: GAP limited discoverable mode
3: GAP general discoverable mode
store Boolean If store is 1 the new value is stored permanently.
AT*BDM?
Get the current GAP discoverability mode. See AT*BDM= for values.
Syntax:
AT*BDM?
Example:
AT*BDM?<br>*BDM:<gap_mode>
Wireless Bolt
™
/ Wireless Bridge II
™
Reference Guide SCM-1202-004 EN 1.7