Anybus Wireless Bolt Reference Guide

AT Commands 36 (88)
3.5.2 AT*WACH Access Point Channel
AT*WACH=
Sets the channel for AP mode.
Syntax:
AT*WACH=<channel>
Input Parameters:
Name
Type Description
channel Integer The channel to use. Valid channels are 1-11 for 2.4 GHz and 36, 40,
44, 48 for 5 GHz.
Requires a reboot for the changes to take effect.
AT*WACH?
Gets the channel for AP mode.
Syntax:
AT*WACH?
Example:
AT*WACH?<br>*WACH:<channel>
Wireless Bolt
™
/ Wireless Bridge II
™
Reference Guide SCM-1202-004 EN 1.7

Anybus Wireless Bolt Specifications

General

Brand	Anybus
Model	Wireless Bolt
Category	Network Hardware
Language	English