Anybus Wireless Bolt Reference Guide

AT Commands 37 (88)
3.5.3 AT*WAAM Authentication Mode for AP
AT*WAAM=
Set the AP Authentication Mode. For default value see AT*AMDEFAULT.
Syntax:
AT*WAAM=<mode>
Input Parameters:
Name
Type Description
mode Integer Authentication Mode: 0 = Open, 2 = WPA/WPA2 PSK
Requires a reboot for the changes to take effect.
AT*WAAM?
Get the AP Authentication Mode.
Syntax:
AT*WAAM?
Example:
Input: AT*WAAM?
Wireless Bolt
™
/ Wireless Bridge II
™
Reference Guide SCM-1202-004 EN 1.7

Anybus Wireless Bolt Specifications

General

Brand	Anybus
Model	Wireless Bolt
Category	Network Hardware
Language	English